Menu
Your Cart

OBSOLETE SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268

OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
Out Of Stock
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE  SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
OBSOLETE SEE TPSC5801 TNC Plug RG58, URM43, URM76 Solder Clamp Silver Plated Greenpar NSN 5935991927268
£0.00
Ex Tax: £0.00
1 to 49 £0.00
50 to 99 £0.00
100 to 249 £0.00
250 to 499 £0.00
500+ £0.00

OBSOLETE  SEE TPSC5801

GREENPAR TNC PLUG, SOLDER CLAMP PRESSURE SLEEVE TOP HAT TERMINATION CABLE CLAMP WITH CAPTIVE CONTACT
T35A70E010X99, GE35870C10, CABLE GROUP 010 RG58CU, RG141À/U, URM43, URM76, BELDEN 9907 - 

NSN 5935991927268

ASSEMBLY INSTRUCTION

The TNC connector is a threaded version of the BNC connector manufactured by Greenpar Connectors. The TNC connector in usually 50 Ω impedance and operates best in the 0–11 GHz frequency spectrum. It has better performance than the BNC connector at microwave frequencies.
It was commonly used by the military for radiom communication and radar applications and has been used in a wide range of radio and wired applications.
The TNC CDonnector was designed in the late 1950s and named after Paul Neill of Bell Labs and Carl Concelman of Amphenol,

Reverse-polarity TNC is a variation of the original TNC specification which reverses the polarity of the mating face.
This is usually achieved by swaping the female contacts normally found in jacks into the plug, and the male contacts normally found in plugs into the jack.

Most TNC connectors are 50-ohm type even when used with coaxial cable of other impedances, but a 75-ohm TNC connector is also available.
These can be recognized by a reduced amount of dielectric in the mating ends. They are intermatable with standard 50 ohm connectors.

Write a review

Note: HTML is not translated!
Bad Good