Menu
Your Cart

N Bulkhead and Panel Crimp Jack 50 Ohm

The N connector follows the MIL-C-39012 standard, defined by the US military, and comes in 50 and 75 ohm versions. The 50 ohm version is widely used in the infrastructure of land mobile, wireless data, paging and cellular systems. The 75 ohm version is primarily used in the infrastructure of cable television systems. Connecting these two different types of connectors to each other can lead to damage due to the difference in diameter of the center pin Unfortunately, many type N connectors are not labeled, and it can be difficult to prevent this situation in a mixed impedance environment. The situation is further complicated by some makers of 75 ohm sockets designing them with enough spring yield to accept the larger 50ohm pin without irreversible damage, while others clearly do not, and expect users to segregate their connectors and adaptors. In general a 50 ohm socket is not damaged by a 75 ohm pin, but the loose fit means the contact quality is not guaranteed.

The 50 ohm type N connector is favored by enthusiasts who create their own Wireless LAN antenna systems, which run at 2.4 GHz or 5 GHz. The Cantenna is one such design. The enthusiasts have settled on using the N connector as a standard connection for homebrew antennas. By using a cable with an N connector one can easily interchange homebrew antennas. 50Ω N connectors are also commonly used on amateur radio devices (e.g., transceivers) operating in UHF bands.

Download Performance Specification

N Panel Solder Clamp Jack RG58 N Panel Solder Clamp Jack RG58
Pre-Order
Model: 25N-50-3-4/133NE
 N TYPE PANEL JACK FOR RG58, URM43, URM76, LLA195, LBC195 BELDEN 9907 CABLE TYPES SOLDER CLAMP TERMINATION. HUBER SUHNER   Greenpar Equivalent N15G57J010C99    ..
£16.20
Ex Tax:£13.50
N Panel Solder Clamp Jack UT141 N Panel Solder Clamp Jack UT141
Pre-Order
Model: 25N-50-3-9/133NE
25N-5039/133NE N Panel Solder Clamp Jack for UT141, EZ141 cable Huber suner.Greenpar Alternative N15G57J073C99         ..
£25.08
Ex Tax:£20.90
Model: NJCAP
N male dust cap female with chain to fit male N connectors. Nickel Plated body.NSN-5935-99-947-0691DOWNLOAD DRAWINGThe N connector is a threaded, weatherproof connector, used to join coaxial cables. It was one of the first coaxial connectors with the ability to carry microwave-frequency ..
£4.32
Ex Tax:£3.60
Model: NPCAP
N male dust cap plug and chain to fit female N connectors. Nickel Plated body. - Greenpar Equivalent N10Z01J999X99 10001NSN 5935-99-199-1984  GE15001-4NSN5935-99-999-5224US MIL NO MX913/UDOWNLOAD DRAWINGThe N connector is a threaded, weatherproof connector, used to join..
£3.42
Ex Tax:£2.85
Model: NBJCR195
N TYPE BULKEAD CRIMP JACK FOR CNT-195, HPF195, KX 15, LMR-195,  LLA195, WCX195,NICKEL BODY GOLD CONTACTCRIMP TOOL PART NUMBER CR015075STRIPPING TOOL PART NUMBER CST5859CABLE STOCK CODE LLA195CABLE STRAIN RELIEF BOOTS DOWNLOAD DRAWINGThe N connector is a..
£6.30
Ex Tax:£5.25
NBJCR213SS N Bulkhead Crimp Jack Socket RG213 SEE NBJCR213 - NICKEL PRODUCT NBJCR213SS N Bulkhead Crimp Jack Socket RG213 SEE NBJCR213 - NICKEL PRODUCT
Out Of Stock
Model: NBJCR213SS
N TYPE CRIMP BULKEAD JACK FOR RG213, URM67 - SEE NBJCR213 - NICKEL PRODUCT GREENPAR EQUIVALENT N15H61E001X99 CABLE GROUP 004 SILVER BODY SIOLVER CONTACTCRIMP TOOL REFERENCE CR01213STRIPPING TOOL REFERENCE CST213CABLE STOCK CODE RG213UCABLE STOCK CODE URM67DOWNLOA..
£7.90
Ex Tax:£6.58
Model: NBJCR214SS
N Type Bulkhead Crimp Female For RG214 Coaxial CableGREENPAR EQUIVALENT N15H61E004X99 CABLE GROUP 004 SILVER BODY SILVER CONTACTCRIMP TOOL REFERENCE CR01213STRIPPING TOOL REFERENCE CST213CABLE STOCK NUMBER RG214U DOWNLOAD DRAWINGThe N connector is a thread..
£7.66
Ex Tax:£6.38
Model: NBJCR223
N TYPE FULL CRIMP BULKHEAD JACK RG55, RG223, RG142, RG400, URM 301 GREENPAR EQUIVALENT N15H61J060X99 CABLE GROUP 060CABLE STOCK CODE RG223UCABLE STOCK CODE RG223LSZHCRIMP TOOL PART NUMBER FOR OUTER SLEEVE AND CENTRE CONTACT CR015075STRIPPING TOOL PART NUMBER CST5859 ..
£6.30
Ex Tax:£5.25
Model: NBJCR240
N Bulkhead Crimp Jack for Belden H155A, Belden 9258, CNT-240, HPF 240, LLA240, LMR-240, MRC 240 AFB, S 04172 D, SPEEDFOAM 240 HFJ, SX 04172 B-60, TZC 500 25, WCX240, H 155 Low Loss Antenna Cable. RG8X CRIMP TOOL PART NUMBER CR015075STRIPPING TOOL PART NUMBER CST5859CABLE ST..
£7.26
Ex Tax:£6.05
Model: NBJCR519
N BULKHEAD CRIMP JACK TO FIT LLA400, LMR400, LBC400 AND RA519 CABLECRIMP TOOL REFERENCE CRLMR400STRIPPING TOOL REFERENCE CST-400CABLE  STOCK REFERENCE LLA400CABLE  STOCK REFERENCE LLA400UF DOWNLOAD DRAWINGPRODUCT SHEETThe N connector is a thre..
£8.71
Ex Tax:£7.26
Model: NBJCR58
N TYPE BULKEAD CRIMP JACK FOR RG58C/U, 7806A, 9907, CNT-195, HPF195, KX 15, LMR-195, LLA195 WCX195, 1.0/2.95 AF, RG-141A/U, URM43, URM76. Impedance 50 ΩGREENPAR EQUIVALENT N15H61J010X99 CABLE GROUP 010NICKEL BODY GOLD CONTACTCRIMP TOOL PART NUMBER CR015075STRIPPING..
£6.06
Ex Tax:£5.05
NBJSC58RF01 N Bulkhead Jack Socket Solder Clamp With 48MM x 2MM flange size RG58C/U, 7806A, 9907, CNT-195, HPF195, KX 15, LMR-195,  LLA195 WCX195, 1.0/2.95 AF, RG-141A/U, URM43, URM76.  NBJSC58RF01 N Bulkhead Jack Socket Solder Clamp With 48MM x 2MM flange size RG58C/U, 7806A, 9907, CNT-195, HPF195, KX 15, LMR-195,  LLA195 WCX195, 1.0/2.95 AF, RG-141A/U, URM43, URM76. 
Pre-Order
Model: NBJSC58RF01
N TYPE SOLDER CLAMP BULKHEAD JACK WITH 48MM x 2MM APPROX FLANGE SIZE. IDEAL FOR MOUNTING ONTO THIN SECTION PANELS, FIBREGLASS AND MOULDED PLASTIC. COMMON USE FOR MARINE DECK MOUNTS.RG58C/U, 7806A, 9907, CNT-195, HPF195, KX 15, LMR-195, LLA195 WCX195, 1.0/2.95 AF, RG-141A/U, URM43,..
£8.78
Ex Tax:£7.32
Showing 1 to 12 of 18 (2 Pages)