CCS offer a superior crimp tool kit housed in a tough PVC carrying case with a moulded plastic tray. the kit contains a cable cutter, coaxial cable stripper, a ratchet tool frame made from hardened steel, and five die sets covering almost any hexagonal dimensions from 1.07mm to 10.9mm across flats. Please consult the table below for each of the five die sets individual crimp dimensions supplied with the Kit.

A screw driver to assist die set change is included in the kit.

HT-330K

EXCEL BB0.5MPLOR
Excel Cat 5e Unscreened Booted Patch Leads LSOH 0.5m Orange
•Independently Verified
•Supports Gigabit Ethernet
•LSOH Cable Sheath
•Category 5e Compliant
•Choice of Colour
•Blade Style Boot with Clip Protector
No.3 cabling system by market share, as reported by BSRIA
Product Overview
Excel Category 5e Unscreened Patch Leads are manufactured, tested and independently verified to the ISO11801 and EN 50173 Category 5 and EIA/TIA standards for enhanced performance.
Each cable consists of 8 colour coded stranded 24AWG conductors twisted together to form 4 pairs with varying lay lengths. The outer sheath is of LSOH construction. A choice of jacket colours enables departmental or application identification, where necessary.
Cables are fitted with plastic strain relief boots, for applications that may require continuous patching or a degree of stress relief applied to each cable. The boot is of a slimline blade style suitable for high density patching applications, shaped to also provide protection to the latch of the connector.
For convenience lengths up to and including 5m are supplied packs of 10.

TELEGARTNER N PLUG TO N PLUG CABLE ASSEMBLY LMR195 2.0 METRE

FULLY TESTED

RoSH Compliant.

CCS offer a professional cable tie gun or also know as a tie wrap gun. HT-218 for cable tie size width up to 4.8mm, thickness up to 1.6mm.

This tough metal framed tie wrap gun will tighten and cut plastic ties and features an adjustable tension thumb wheel to allow the user to decide the level of tightness required on each individual job. The cutting edge is 7 mm wide and is suitable for cable tie sizes from 2.2 mm through to 4.8 mm.

This is a very storng cable tie / wrap gun and is a must for the installers tool kit.

HT-218

CABLE TIE GUN INFORMATION

Coaxial Ratchet Crimp Tool
Tool frame Made From Hardened Steel
Ratchet Controlled Crimp Cycle
Ratchet Release Option
RG213 RG214 RG11 URM67 LMR400

Hex Sizes     0.1", 0.128", 0.429"      2.54, 3.25, 10.9mm

HT-301K

DIE SET INFORMATION

BNC Plug Male Inter series Connector Face. This is a direct alternative to the Greenpar Reference GE507

NSN 5935-99-519-9806

A complete inter-series adaptor consists of any two connector faces. each of which is screwed onto one side of a central coupler. All our couplers are 50 ohm and seperate mating faces are 50 ohm.

Gold plated body and contact.

Download Drawing

Radio Frequency Adaptor Kit.

If you are in the RF or Audio/Video market for long enough, you will need an adapter that you just don't have on hand. This 40 Piece RF Adapter Kit is the answer  you have been looking for. Using  connectors and universal couplers included in the kit, it allows you to easily make 64 interseries connector combinations by simply screwing two connectors together. Every technician / engineer should keep this kit in their tool box, service vehicle or tool cart. Make the adapter quickly in the field to get the equipment up and running and replace the adapter later when you have more time.

Download Drawing

Features

CR10A7P4P is a direct alternative to the Hirose HR10A-7P-4P Cable Mount Circular Connector.
Male Body - Male Solder Contact 4 Pin.
Crimp Tool Reference CR10ACRT7

CR10A GRUB SCREW SPARES

Download Data

Features & Benefits

1. Compact, simple design for use in most applications with limited space.

2. Easy "PUSH-PULL" Coupling
One touch "push-pull" coupling mechanism for easy, accurate and quick connection using the connector housing.

3. Polarization
The connector has a Five-key system that only allows correct coupling. Ideal for blind mate situations

4. High density
Due to the small design of the "push-pull" mechanism, multi-installation of connectors is possible.

5. Cost Saving
Low cost solution, but top quality product. RoHS approved. Manufactured to ISO 9001:2000

CR10A7R4S is a direct alternative to the Hirose HR10A-7R-4S Bulkhead Panel Fixing Circular Connector. Female Body - Female Solder Contact 4 Pin.

Download Data

Features & Benefits

1. Compact, simple design for use in most applications with limited space.

2. Easy "PUSH-PULL" Coupling
One touch "push-pull" coupling mechanism for easy, accurate and quick connection using the connector housing.

3. Polarization
The connector has a Five-key system that only allows correct coupling. Ideal for blind mate situations

4. High density
Due to the small design of the "push-pull" mechanism, multi-installation of connectors is possible.

5. Cost Saving
Low cost solution, but top quality product. RoHS approved. Manufactured to ISO 9001:2000