Menu
Your Cart

F Type Crimp Plug

The F connector is a coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable. It was invented by Eric E. Winston in the early 1950s while working for Jerrold Electronics on their development of cable television. In the 1970s it became commonplace on VHF television antenna connections, as coaxial cables replaced twin-lead, and later for UHF also.

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz. One reason for its low cost is that it uses the solid conductor (center wire) of the specified types of coaxial cable as the pin of the male connector. This design is subject to the surface properties of the inner conductor (which must be solid wire) and is not corrosion resistant; hence waterproof versions are needed for outside use (for example, on aerials). Corrosion resistance can be improved by coating all bare copper wires with silicone grease. The male connector body is typically crimped, or sometimes screwed, on to the exposed outer braid. The cable industry standard now is to use compression fittings. Female connectors have a 3/8-32 UNEF thread (9.525mm diameter). Most male connectors have a matching threaded connecting ring, though push-on versions are also available. Push-on F connector ends provide poor shielding against airborne signals (e.g., a nearby TV transmitter will interfere with a CATV station).

It is suitable for domestic terrestrial, cable, and satellite TV installations and offers significant improvements over the Belling-Lee connector (IEC 169-2) used on European terrestrial receivers. It requires slightly more care to properly install the male connector to the cable than with Belling-Lee type and attention should always be paid to the quality of the connector and matching with the cable size.

Model: FPCRCT100
F Crimp Plug For CT100, RG6, WF100This connector is commonly used in satellite and cable TV applications and is perfect for the home installer or DIY person.DOWNLOAD DRAWINGCrimp tool CR01RG6..
£0.28
Ex Tax:£0.23
F Crimp Plug CT125 F Crimp Plug CT125
Pre-Order
Model: FPCRCT12501
F Crimp Plug CT125..
£2.40
Ex Tax:£2.00
F Crimp Plug CT167 F Crimp Plug CT167
Hot
Model: FPCRCT167
F Type Crimp Plug for CT167, RG11,  and H43 cable types. This F Type Crimp Plug is Ideal For Installer applications.HEX SIZE 11.4MMCrimp Tool CR01213DOWNLOAD DRAWING ..
£2.26
Ex Tax:£1.88
Model: FPCR179
F TYPE MALE CRIMP CONNECTOR, CABLE MOUNT.SUITABLE CABLES RG179BU, RG179PE, RG179LSZHDOWNLOAD DRAWING     ..
£1.00
Ex Tax:£0.83
Model: FPCR6
F Type Crimp Plug RG6Download Drawing ..
£0.30
Ex Tax:£0.25
Model: FPTOCT100
FPTOCT100 - F Type Twist On Plug CT100 & WF100..
£0.42
Ex Tax:£0.35
Showing 1 to 6 of 6 (1 Pages)